Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$135.99
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp 11-speed Freehub Body for 30/60 Wheels
$74.99
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,149.99
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions it's the all-around performer and standard by which all aero wheels are measured. At the center of the wheelset is Zipp's 77/177 hubset, an innovation that results in improved stiffness, durability, simplicity and versatility - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,349.99
Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp Decal Set
$20.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Wheels Manufacturing Inc. Axle-04
$39.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-09
$35.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Inc. Outer Axle Nut
$1.49 - $9.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$99.99
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$39.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's NoTubes All Mountain 29er Tubeless Kit
$79.99
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Alloy Tubeless Valve Stems
$24.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Crest MK3 29-inch Rear
$370.00
Wider and even lower profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Stan's Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - Tubeless ready with rim tape and valves installed - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for 2.00"-2.25" XC tires
Stan's NoTubes Cyclocross Rim Strip
$22.50
Stan's Cyclocross Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Neo Speedsync Freehub
$179.99
Stan's original Neo hub has evolved to be stronger and more reliable than ever. The additional stress of larger cassette cogs, more capable bikes, and even more challenging trails led to the creation of the Neo with Speedsync. This CNC machined Speedsync freehub is a direct replacement for your Neo hub and includes pawls, springs, pawl retaining ring, and 2 red freehub spacers. Bearings are pre-installed. Note: - Singlespeed freehub cannot be used to convert a hub originally set up with a Shimano or Sram XD freehub to SS. This freehub is only to be used with Stan's Neo SS hubs. - OneUp freehub WILL NOT WORK with a SRAM cassette or Shimano cassette without a One Up Shark Cluster.
Stan's NoTubes Rim Tape
$14.99 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Threaded Valve Extenders
$26.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Stan's NoTubes ZTR Flow EX Wheel (Front, 29-inch)
$260.00
Stan's ZTR Flow EX Wheel is perfect for the trail rider who likes to pin it on the downhills and pedal back up to the top for more. The Flow rim utilizes a unique arch shape for increased strength and stiffness, while Stan's BST technology allows for easy tubeless conversions. Plus, the rim's wide inner profile and lowered sidewalls boost tire volume for enhanced traction on tricky terrain. And, the Flow is built around Stan's 3.30HD hub with DT Swiss spokes for a responsive ride and trail-after-trail reliability.
Specialized Stout XC 90 Pro Wheels
$300.00 - $350.00
The Stout XC 90 Pro wheel features a 90mm-wide alloy rim, a front wheel that's designed for use with the RockShox Bluto fork and a rear wheel that includes a XD driver for compatibility with SRAM's XX1 drivetrain. Along these lines, you'll find a stiff, reliable 15x150mm thru-axle. And to ensure that the wheel is up to perform in any condition and over any terrain, the wheel includes sealed cartridge bearings and butted spokes. So it's safe to say that this wheel's balance of lightweight and durability makes it well-equipped to perform on dirt, sand, and snow. - Single-wall alloy rims are 90mm-wide and have been mated with aggressive weight cut-outs and a hookless bead design to create a lightweight, fast-rolling wheel. - Alloy front hub body with two sealed cartridge bearings, 150mm width, and 15mm thru-axle for RockShox Bluto fork compatibility. - Alloy rear hub body includes four sealed cartridge bearings for reliable, all-weather performance, as well as a lightweight alloy cassette body to keep the overall weight down. - Includes a XD driver (installed) for XX1 compatibility, as well as a standard alloy cassette freehub body for use with 10-speed drivetrains.
Saris Trainer Skewer
$14.99
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Salsa QR Skewer Springs
$9.99
Salsa springs for Flip-Off skewers
Robert Axle Project Rear Lightning Bolt-On Thru Axle
$48.00 - $59.99
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Robert Axle Project Trainer Thru Axle
$53.99 - $69.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Quality Wheels Formula / Alex AP18 27-inch Front
$54.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels Formula / Alex Y2000 26-inch Front
$54.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels Formula / Alex Y2000 700c Front
$54.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels Formula 130mm Freehub / Alex Y2000 Silver 700c Rear
$59.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true. - 25mm external rim width
Quality Wheels Formula 130mm Freewheel / Alex Y2000 700c Rear
$59.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
Quality Wheels Formula 135mm Freehub / Alex Y2000 Silver 700c Rear
$59.99
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
Page 1 of 24 Next page