Tools/Maintenance

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups. - 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs - 8 installation drifts for standalone bearing installation - Organized in a convenient storage case - Full list of compatible bearing inner/outer diameters found on instructions/parts diagram NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade - Plastic body

Tools for servicing Manitou forks

- Pedal thread inserts are used to replace damaged threads in cranks

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum

Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel

8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking