Filter By:
Accessories/Parts

$39.99
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

$59.99
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

$79.95
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

$99.95
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

$59.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$99.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 8 locks, all using the same key

$59.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

$29.99
The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

$29.99
- Pack includes 2 wheels straps and 2 road adaptors
- The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

$60.00
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$49.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$29.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

$44.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

$54.99
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock.
- Secure bike rack to vehicle to deter theft.
- Cables secured within closed trunk.
- Includes 8 ft. cable.
- Includes 2 keys.

$28.99 - $34.99
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

$14.99
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

$79.99
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes.
- Supports up to a 4-bike rack (100 lb max)
- All hardware included
- 2" hitch and 1.25" hitch adaptor included
- Magnetic faceplate

$44.99
- For carrying unique frames on hang-on type car racks
- Quick release clamp adjusts to fit between stem and seatpost
- Rubberized hooks protect bikes finish

$19.00
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty

$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

$4.50
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty

$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop.
Product Details
- Durable stainless steel axle and body
- Easy to adjust end nut and cam lever
- Lockable with a SKS lock, sold separately
- Includes 9mm x 135mm threaded adapters for Yakima ForkChop
- Includes 135mm sleeve for use on Yakima HighSpeed
Product Specs
- Weight: 1.15 lbs
- Dimensions: L 9.50" x W 3.50" x H 1.25"

$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

$126.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Product Details
- Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
- Complete set of 4 Landing Pads with no additional tools required
- 33" crossbar spread allows most Yakima gear mounts
- Snap-on covers to keep the elements out while the rack is removed
- Weight: 1.35 lbs
- Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

$126.00
Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
- Includes a snap-on cover when not in use
- Each pad sold in a set of two
- Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates)
Product Specs:
- Weight: 0.60 lbs.
- Limited Lifetime Warranty

$60.00
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.

$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in

$126.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight.
- Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails
- Range of shapes lets you find the precise, secure fit specific to your vehicle
- Unique inner and outer clip design delivers exceptional hold
- Powder-coated stainless steel provides maximum strength and durability
- Sold in sets of four – just one kit sets up your system

$30.00
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers.
- Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four.
- Includes 4 RoundBar end caps
Product Specs:
- Weight: 0.42 lbs.
- Dimensions: L 2.00 in x W 2.00 in x H 1.00 in
- Limited Lifetime Warranty
Page 1 of 6
Next page